No Disassembly Tablet Holder for DJI Mini 4K/ Mini 2 SE/Air 2S/ Air 3/ Mavic 3/ Mini 3/ Mini 4 Pro, 7-12 Inch Foldable iPad Mount Holder pack of Lanyard and 2 Data Cables, DJI RC-N1/RC-N2 Accessories
$21.99
Price: $21.99
(as of Jun 30, 2024 20:23:09 UTC – Details)
Product Description
FPVtosky No Disassembly Tablet Holder for DJI Mini 4K/ Mini 4 Pro/ Mini 3/ Mini 2 SE/ Mini 2/ Air 3 /Air 2S with Landray and Data Cables
Compatible with DJI RC-N1/RC-N2 remote control
Compatible with DJI Mini 4K/ DJI Mini 4 Pro/ Mini 3/Mini 3 Pro/Air 3/Air 2/Air 2S/Mavic 3 drone remote controller
Wide Compatibility（Only Supports Tablets! Tablets are 4.33 – 7.48 inches wide）
Compatible with almost all 7-12 inch tablet computers on the market (the width of the tablet is between 4.33“-7.48”), including
iPad Mini (7.9in)iPad (9.7inch)iPad Air (10.5inch)iPad Pro ( 11inch)Galaxy Note (10.1inch)Galaxy Tab S7/S8 (11inch)Galaxy Tab A8 (10.5inch)Tripltek 7 Pro (7inch)Tripltek 8/9 Pro (8inch)Others 7-12 inch pad
You don’t even need to take off your tablet case.
Note: Not suitable for 12.9″ ipad Pro!! Not supports mobile phones!!
Features of The New Version Upgrade
Compatible with Lanyard Snap
Solve the problem of not removing the old snap will affect the folding of the tablet, to achieve 100% of the bracket can be folded
Supports Thicker Tablets
Supports tablets up to 16mm thick, perfectly compatible with all Tripltek series and thick tablets with protective cases
No More Worrying About Weakened Signals
Even if the tablet is installed in the RC-N1 / RC-N2 remote control signal area, you no longer need to worry about the signal being affected. Also optimize the tablet bracket structure to make the installation more stable
Tablet Holder Mount Product Features
No Disassembly
The first foldable DJI Mini 4K/Mini4/3/2 Mavic Air 3/2 tablet holder mount on the market, after installation, it can be directly folded on the remote control, and there is no need to install it next time. Very convenient.
Very Stable
Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling
Easy to Carry
The tablet holder folded on the remote control can be directly put into the drone bag, which is convenient to carry. Note: Some bags of third-party pre-cut sponges are not supported!
Anti-scratch & Anti-slip
Anti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the tablet from scratching
Not Affect Mobile Phone Use
After installing the foldable tablet holder, will not affect the direct use of smart phones, does not affect the recovery of the original phone holder
Lightweight & Strong
The net weight of the tablet stand is 49g (1.73oz), and it is made of sturdy ABS engineering plastic, which is stable and durable without adding too much weight. With the lanyard attached to the product, it is safer and more convenient to use.
Insert the black plastic snap in the direction of the arrow in the legend aligned with the remote control;Connect the plastic snap with the metal hook of the lanyard;Refer to the illustration of the tablet holder pressed into;Use the distribution of screwdriver to tighten the bracket on the 2 fixed screws
1 * Tablet holder for DJI Mini 4K/ Mini 4 Pro/ Mini 3/ Mini 3 Pro/ Mini 2/ Mini 2 SE/ Air 3/ Air 2/2S/ Mavic 3 Classic1 * Screwdriver1 * Type-C to Type-C data cables (11.8in) Note: please connect the Type-C interface with the data transmission logo to the remote control1 * Type-C to IOS data cables (11.8in)1 * Remote control lanyard
No need to disassemble: After using this DJI Mini 4K Mini 2 se tablet stand, you don’t need to remove it, it can be directly folded on the remote control, and you don’t need to install it again next time. You can use it directly
Very stable: Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling
Comfortable oblique vision: Observing tablet at an oblique angle could prevent reflections under sun
Anti-scratch & anti-slip: Anti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the plate from scratching
Wide compatibility: Compatible with almost all 7-12 inch tablet computers on the market (the width of the tablet is between 11cm-19cm), including iPad Mini (7.9″), iPad (9.7″), iPad Air (10.5″), iPad Pro ( 11″), Galaxy Note (10.1″), Galaxy Tab S7 (11″), etc. You don’t even need to take off your tablet case. Note: iPad Pro 12.9″ is not supported!
Applicability: for DJI Mini 4K, Mini 4 Pro, Mini 3/ Mini 3 Pro, DJI Mavic 3, DJI Mini 2 SE, Mavic Air 2 and Mavic Air 2S
Packing list: 1* Tablet Holder 1* screwdriver 1* type C to Type C data cable(11.8″) 1* type C to IOS data cable(11.8″) 1* remote control lanyard. Note: please connect the Type-C interface with the data transmission logo to the remote control
Customers say
Customers like the ease of installation of the portable electronic device stand. They mention that it’s easy to install and remove. They appreciate the fit of the product, saying that it fits perfectly on their drone controller. Customers also like the quality of the stand, saying it works well and is awesome. However, some customers have reported issues with connectivity, saying the USB-C cable doesn’t work. Opinions are mixed on the foldability.
AI-generated from the text of customer reviews
User Reviews
Be the first to review “No Disassembly Tablet Holder for DJI Mini 4K/ Mini 2 SE/Air 2S/ Air 3/ Mavic 3/ Mini 3/ Mini 4 Pro, 7-12 Inch Foldable iPad Mount Holder pack of Lanyard and 2 Data Cables, DJI RC-N1/RC-N2 Accessories”
Related Products
$21.99
There are no reviews yet.